Digitalni termostat SHT2000 kontrola vlaznosti i temp

Specifikacija:
Naziv proizvoda: Regulator temperature i vlažnosti
Model proizvoda: SHT2000
Napon napajanja: AC 110 ~ 230V
Frekvencija napajanja: 50 / 60Hz
Opseg temperatura: -20 ~ 60 ° C
Opseg vlažnosti: 0% ~ 100% RH
Tačnost merenja temperature: 0,3 ° C
Tačnost merenja vlažnosti: 3%
Izlazna kontrola: Relejni izlaz
Izlazna snaga: MAKS 10A

Setting method: Start value < stop value (program automatically determines working mode is heating/humidifying mode)

Setting method: Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode)

Heating/cooling mode setting:

Setting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.

Setting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.

 

Heating use case: control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again

Step 1: heating mode, starting temperature < stop temperature

Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 ° C.

Step 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 ° C with ▲▼ keys, and the setting is completed!

 

Refrigeration use case: use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.

Step 1: cooling mode, starting temperature > stop temperature

Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 ° C.

Step 3: Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature to 26° C. The setting is completed!

Humidification/Dehumidification Mode Settings:

Setting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.

 

Humidification example: fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification.  

 

Setup steps:

Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.

Step 2: long press the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 80% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.

 

Dehumidification example: workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification

 

Setup steps:

Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.

Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.


******************************************************
UŠTEDITE VREME NARUČITE ZA 30 SEKUNDI 
Pošaljite SMS na broj telefona  063/174-1111 
******************************************************
Ime i prezime.   
Ulica i broj.   
Mesto i poštanski broj.   
Broj telefona za kontakt.   
Naručujem  A982K2  Digitalni termostat SHT2000
*******************************************************

Informacije Uglavnom sve artikle imamo na stanju . Molim vas za porucivanje pustite tekstualnu poruku na viber ili SMS .