Modul kontrole punjenja 6-60v 30A

Izdvajamo iz modula:
Podržava Lead-acid battery and Acting Battery, opseg napona: 6V ~ 60V; Može istovremeno prikazati napon, procenat baterije, vreme punjenja putem LCD-a; Funkcija je vrlo moćna, ostvaruje automatsku kontrolu punjenja, kontrolno vreme punjenja, takođe može postaviti i otpremiti odgovarajući parametar kroz serijski port;

Function description: 1.  Automatic Charge control function:

By setting the volt-HI: 'UP' volt-LI: 'dn'; When the battery voltage is below the volt-LI: 'dn', the relay leads, the charger begins to charge the battery; when the battery voltage is up to volt-HI: 'UP', the relay is diconnected and the automatic charge is completed once;

2.  Charge Time Control Function:

   How to turn on the time control function?

After entering the parameter set, set the parameter op is non-zero, then turn on the time control function, op default parameter is: --: --h, the default does not turn on time control function;

After the opening Time control function (OP is non-zero), when the battery voltage is the lower volt-LI'dn',  the charger began to charge the battery, the system began to clock; During the timing, the battery voltage ≥ volt-HI'UP', relay disconnect;  If the OP time is up, the battery voltage is still the lower volt-LI'dn', the relay keeps the conduction, automatically closes the charge time control function, and flashes the H: ER to remind the user, the time parameter setting is unreasonable; Press any key to stop flashing;

Note: Time format: 00:59 (00 for hours, 59 for minutes) The maximum time is 99:59, which is 100 hours.

Parameter Setting:

•  Press and hold the SET key to enter the setting interface;
• Switch the parameters you want to set by short press SET;
• After the selection of parameters, can be set by the UP/DOWN key to support the short press, long press (fast increase or decrease);  To set other parameters, repeat step b, c);
• After all parameters are set, long press set key to exit and save;

 The Key Function Description:

In the Run interface (main interface):

Short press SET button to display the current set of parameters;  Short press UP button, toggle display charge percentage and charging time;

Short Press DOWN button, select Turn on/off relay enabling, if the relay can be closed, will show ' off ' as a reminder;

Long press UP button, switch low power state

on: No operation in 10 minutes turn off backlight

OFF:  Backlight is always bright

Long press SET button, enter the parameter settings.

******************************************************
UŠTEDITE VREME NARUČITE ZA 30 SEKUNDI 
Pošaljite SMS na broj telefona  063/174-1111 
******************************************************
Ime i prezime.   
Ulica i broj.   
Mesto i poštanski broj.   
Broj telefona za kontakt.   
Naručujem  A422
*******************************************************

Informacije Uglavnom sve artikle imamo na stanju . Molim vas za porucivanje pustite tekstualnu poruku na viber ili SMS .