Vremenski relej odlozeno gasenje sa dugmetom 12v

Model: YYC-2S 24 Common functions, to meet more application needs; can control solenoid valves, pumps, motors, lights, etc. Input Voltage: DC 5V / 12V / 24V Output power: 10A Relay Time range: 0.01s-999m Adjustable   Description of the wiring port: DC+: input DC power supply positive DC-: input DC power supply negative IN+: positive input terminal IN-: signal input terminal NO: relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM COM: relay common interface NC: The relay normally closes the interface, and the relay is shorted to COM before the suction is closed.   Function:   P-11: Jog P-12: Self-locking P-13: Give signal, the relay will stop automatically for A seconds; the trigger will be invalid during the delay. P-14: Give signal, relay will stop automatically for A seconds; trigger re-time during delay P-15: Give signal, relay is automatically stopped for A seconds; trigger timing is triggered during delay P-16: Give signal, relay will stop automatically for A seconds; trigger reset during delay P-17: Give signal, relay is closed, input signal is disconnected, output is off after A seconds P-18: After power-on, the relay will immediately pull in, after a delay of A seconds, the power will be turned off; P-21: Disconnect the signal relay, after a delay of A seconds, the relay pulls in P-22: Give signal, after more than A seconds, the relay pulls in, the signal disappears, the relay stops. P-23: After the signal disappears for more than A seconds, the relay is closed, there is a signal, and the relay stops. P-24: There is a signal. After more than A seconds, the relay is closed. When the signal disappears for more than A seconds, the relay stops. P-25: There is a signal after more than A seconds, the relay is closed, and after a signal exceeds A seconds, the relay stops. P-26: There is a signal. The relay stops after A seconds of suction, and the signal disappears. The relay stops again after A seconds. P-27: The pulse signal is detected and the relay is closed; if there is no pulse signal, the relay delays for A seconds; P-28: After power-on, after a delay of A seconds, the relay pulls in until the power is turned off. P-31: After power-on, the relay pulls in for A seconds, disconnects B seconds, infinite loop; power-off stops P-32: signal, start P-31 P-33: Give a signal, start P-31 infinite loop; give another signal to terminate the loop P-34: After power-on, after a delay of A seconds, the relay pulls in and closes after B seconds. P-35: There is a signal. After a delay of A seconds, the relay pulls in and closes after B seconds. P-36: There is a signal. After more than A seconds, the relay pulls in and closes after B seconds. P-37: There is a  Included:   1 x Time Delay Relay

 

 ******************************************************
UŠTEDITE VREME NARUČITE ZA 30 SEKUNDI 
Pošaljite SMS na broj telefona  063/174-1111 
******************************************************
Ime i prezime.   
Ulica i broj.   
Mesto i poštanski broj.   
Broj telefona za kontakt.   
Naručujem  A338K67  Vremenski relej odlozeno gasenje sa dugmetom 12v
*******************************************************

Informacije Uglavnom sve artikle imamo na stanju . Molim vas za porucivanje pustite tekstualnu poruku na viber ili SMS .